TargoFIX 1A (310 ml cartridge) – High-performance sealant for exterior applications
TargoFIX 1A is a permanently plastic high-performance sealant based on acrylate for windtight bonding of membrane overlaps as well as edge and wall connections – especially designed for outdoor applications.
Thanks to its weather resistance and extreme aging resistance, TargoFIX 1A ensures long-term reliable connections.
Suitable for applications according to DIN 4108 / SIA 180 and can also be used for interior wall connections.
Typical Applications
- Windtight sealing of membrane overlaps
- Wall and edge connections in exterior areas (e.g. on mineral substrates)
- Also suitable for interior wall connections
Benefits
- Weather-resistant – ideal for outdoor use
- Extremely resistant to aging and environmental influences
- Excellent adhesion without primer, even on slightly damp surfaces
- Good stability – clean and easy application
- High bonding strength and strong resistance to moisture and embrittlement
Application Instructions
Surface: Must be dry, stable, and free of dust and grease.
- Apply as a continuous bead of at least 8 mm
- Press membrane gently onto the bead – bead must remain at least 4 mm thick
Overlaps & Connections:
- Install overlaps without tension
- For edge connections, tension-free installation is required; for vapor barriers, a relief loop is recommended
Important: TargoFIX 1A provides sealing, not structural bonding.
If tensile forces are expected, connections must be mechanically secured.
Technical Data
| Base |
Acrylate-based, permanently plastic sealant (solvent-based) |
| Open time |
approx. 30 minutes |
| Drying time |
approx. 3 days |
| Application temperature |
from +5 °C |
| Temperature resistance |
-40 °C to +90 °C |
| Storage |
Store dry at room temperature, frost-resistant |
| Packaging |
310 ml cartridge |
| Carton |
12 cartridges per box |
Documents
Technical Data Sheet & Application Instructions (PDF, German)
