DOBAU® Dachelastik 5 kg – roof sealing compound for bitumen membranes, wood, metallic & mineral substrates
DOBAU® Dachelastik is a pasty, thixotropic roof sealing compound based on solvent-containing polymer bitumen for producing seamless coatings (new waterproofing and refurbishment). Ideal for roofs with bitumen roofing membranes as well as for wood, metallic and mineral substrates.
Benefits at a glance
- Thixotropic – does not run, easy and economical to apply
- Elastic & crack-bridging
- High heat resistance
- High flexibility even in cold conditions
- High ageing & UV resistance
- Very good adhesion on bituminous & mineral substrates
- Resistant to aqueous solutions, diluted acids, salts, lime, cement and more
Typical applications
- New waterproofing and refurbishment of flat roofs
- Seamless coating on bitumen roofing membranes
- Coating on metal and mineral substrates
- Details/connections – with reinforcing fabric in crack-prone areas
Application
- Prepare the substrate: clean, dry, free from oil and grease, and sound and load-bearing. Remove loose particles and repair defects. Cut open bubbles and waves in roofing membranes and seal them properly.
- Primer: A bitumen primer is generally not required.
- Weather conditions: Component and ambient temperature > +5 °C. Protect from water, rain and frost during application and drying.
- Application: Stir the material thoroughly, spread it and apply with a coating brush or rubber squeegee in an even layer thickness in at least 2 coats (brush strokes parallel).
- Drying: Apply the 2nd coat only after the 1st coat has dried (depending on weather, usually after approx. 1 day).
- Connections / crack-prone surfaces: Work in reinforcing fabric (e.g. glass silk fabric). Method: pre-coat thinly, embed the fabric, press it down and fix it by recoating.
Important note: The product contains aromatic solvents and may attack rigid polystyrene foam. For refurbishment with insulation, use only solvent-resistant insulating materials (e.g. PU, mineral fibre).
Consumption (guide values)
| Application |
Execution |
Consumption |
| Flat roof (roof pitch > 3°) |
at least 2 coats |
approx. 1.5 kg/m² per coat |
| Surface protection (optional) |
broadcast with 1/3 mm slate chippings |
approx. 1.0 kg/m² Dachelastik + 4–6 kg/m² slate chippings |
| Protective layer during roofing work (roof pitch ≥ 1.5° to < 3°) |
at least 2 coats with reinforcing fabric |
approx. 1.5 kg/m² per coat |
Technical summary
| Binder |
polymer bitumen |
| Solvent |
hydrocarbons |
| Color |
black |
| Layer thickness |
1 kg/m² wet application ≈ 0.5 mm dry film thickness |
| Heat resistance |
at +100 °C (2 hrs, 1 mm) no flow |
| Cold resistance |
at -15 °C (1 mm) no flaking |
| Storage |
store frost-free, at least 12 months unopened in original container |
Scope of delivery
1 × DOBAU® Dachelastik 10 kg in bucket
Data sheet & application pdf
