Self-adhesive roof waterproofing membrane 1 m width - 1 m² cut-to-size piece
Heavy-duty quality with 1.5 mm thickness - made in Germany
This self-adhesive roof waterproofing membrane based on bitumen is a practical solution for permanently watertight roof surfaces. Ideal for garden houses, sheds and slightly pitched roofs.
The membrane is cold-applied, requires no burner, offers strong adhesion and features a UV-resistant coated aluminium top layer for reliable sealing in a short time.
Advantages
- Self-adhesive and cold-applied - no open flame required
- Fast installation - ideal for DIY users and professionals
- Strong adhesion when applied correctly
- UV-resistant coated aluminium surface - robust and weatherproof
- Perfect for garden houses, tool sheds, extensions and slight roof pitches
- 1 m² cut-to-size piece
Suitable substrates
Suitable substrates include concrete, masonry, metal, plastics except PVC and dry, non-resinous wood.
The substrate must be dry, dust-free, silicone-free, grease-free and abrasion-resistant. Porous or slightly contaminated surfaces should be prepared with a bituminous primer if necessary and allowed to dry completely.
Application
- Optimal application from +15 °C: For best adhesion, membrane and substrate should be at least +15 °C. To increase adhesive strength, substrate and membrane may be slightly warmed.
- Prepare the substrate correctly: On old wood, concrete and existing bitumen membranes, pretreatment with bitumen primer V is recommended. Use universal primer on sanding or chalking surfaces.
- The substrate must be dry, dust-free, grease-free and load-bearing.
- Lay the membrane lengthwise in the direction of the slope.
- First remove the release film from an approx. 10 cm wide strip and align the membrane cleanly.
- Then unroll piece by piece and press down or roll firmly. Avoid air pockets.
- Plan for an overlap of approx. 10 cm and roll the overlap area firmly and carefully.
Technical data
| Thickness | approx. 1.5 mm |
| Mass per unit area | approx. 1.5 kg/m² |
| Adhesive strength | > 30 N/25 mm |
| Watertightness | passed (2 kPa) |
| Cold bending behaviour | down to ≤ -20 °C |
| Softening point | ≥ 85 °C |
| Colour | Black |
| Top layer | Aluminium, coated, UV-resistant |
| Format | 1.0 m x 1.0 m |
| Width | 1 m |
Data and Installation PDF
