Self-Adhesive Roof Waterproofing Membrane 1 m x 5 m - No Flame Required
Heavy-duty quality with 1.5 mm thickness - made in Germany
This self-adhesive roof waterproofing membrane based on bitumen is a practical solution for permanently watertight roof surfaces. Ideal for garden houses, sheds and slightly pitched roofs. The membrane is cold-applied, requires no torch, offers strong adhesion and features a UV-resistant coated aluminium top layer.
Key benefits
- Self-adhesive and cold-applied - no open flame required
- Fast installation - ideal for DIY and professionals
- Strong adhesion when properly applied
- UV-resistant coated aluminium surface - durable and weatherproof
- Perfect for garden houses, sheds, extensions and low-pitch roofs
- Roll size 1 x 5 m = 5 m²
Suitable substrates
Suitable for concrete, masonry, metal, plastics (except PVC) and dry, non-resinous wood. The surface must be dry, clean, grease-free and load-bearing. Porous or slightly dusty surfaces should be primed with a bitumen primer.
Application
- Apply from +15 °C: membrane and substrate should be at least +15 °C.
- Prepare substrate: use bitumen primer or universal primer if needed.
- Surface must be clean, dry and stable.
- Install membrane along the roof slope.
- Peel off approx. 10 cm of release film and align.
- Apply step by step and press or roll firmly.
- Allow approx. 10 cm overlap and press firmly.
Technical data
Technical Data
| Thickness |
approx. 1.5 mm |
| Weight per area |
approx. 1.5 kg/m² |
| Adhesion |
> 30 N/25 mm |
| Watertightness |
passed (2 kPa) |
| Cold flexibility |
down to ≤ -20 °C |
| Softening point |
≥ 85 °C |
| Colour |
Brick red / terracotta |
| Top layer |
Coated aluminium, UV-resistant |
| Size |
1.0 m x 5.0 m |
| Area |
5 m² |
Data & Installation PDF
