Self-Adhesive Roof Waterproofing Membrane 1 m² Cut-to-Size

Self-Adhesive Roof Waterproofing Membrane 1 m² Cut-to-Size - Waterproofing Without Flame

Heavy-duty quality with 1.5 mm thickness - made in Germany

This self-adhesive roof waterproofing membrane based on bitumen is a practical solution for permanently watertight roof surfaces. Ideal for garden houses, sheds and slightly pitched roofs. The membrane is cold-applied, requires no burner, offers strong adhesion and features a UV-resistant coated aluminium top layer.

Key benefits

• Self-adhesive and cold-applied - no open flame required
• Fast installation - ideal for DIY users and professionals
• Strong adhesion when applied correctly
• UV-resistant coated aluminium surface - robust and weatherproof
• Perfect for garden houses, sheds, extensions and slightly pitched roofs
• 1 m² cut-to-size piece, 1 m wide

Suitable substrates

Suitable substrates include concrete, masonry, metal, plastics except PVC and dry, non-resinous wood. The substrate must be dry, dust-free, silicone-free, grease-free and abrasion-resistant. Porous or slightly contaminated surfaces should be prepared with a bituminous primer if necessary and allowed to dry completely.

Application

1. Optimal application from +15 °C: For best adhesion, membrane and substrate should be at least +15 °C. To increase adhesive strength, substrate and membrane may be slightly warmed.
2. Prepare the substrate: On old wood, concrete and existing bitumen membranes, pretreatment with Bitumen Primer V is recommended. Use Universal Primer on sanding or chalking surfaces.
3. The substrate must be dry, dust-free, grease-free and load-bearing.
4. Lay the membrane lengthwise in the direction of the slope.
5. First remove the release film from an approx. 10 cm wide strip and align the membrane cleanly.
6. Then unroll piece by piece and press down or roll firmly. Avoid air pockets.
7. Plan for an overlap of approx. 10 cm and roll the overlap area firmly and carefully.

Technical data

Data and Installation PDF