STEICO Sealing Plug – for Blowing Openings Ø 105 mm
STEICO sealing plugs are used for the secure closure of drill holes in wood fibre insulation boards, for example after blowing in insulation material or for fastening holes. The tapered toothed ring profile ensures easy fitting and a permanently secure hold. Installation is carried out by hand or with a rubber mallet, no adhesive or primer is required.
Properties and Benefits
- For blowing openings and fastening holes in wood fibre insulation boards
- Tapered toothed ring profile for easy installation and a secure fit
- Quick installation by hand or rubber mallet, without adhesive or primer
- Can be plastered over directly (matching the STEICO ETICS system), no visible marks in the plaster layer
- Water-repellent, immediate weather protection thanks to continuous hydrophobic treatment
- Wood from sustainable forestry, PEFC certified
Application Area
For the closure of drill holes in wood fibre insulation boards after blowing in insulation material (e.g. blowing openings) as well as for holes used for fasteners.
Installation
- Create an opening in the upper part of the cavity using a suitable hole saw for Ø 105 mm.
- Fill the cavity with insulation material.
- Insert the plug flush with the wood fibre board using pressure or a wooden block / rubber mallet.
Technical Data (Excerpt)
| Standard/monitoring |
DIN EN 13171 |
| Reaction to fire |
E (DIN EN 13501-1) / RF3 (CH) |
| Declared thermal conductivity |
λD = 0.045 W/(m·K) |
| Bulk density |
approx. 210 kg/m³ |
| Short-term water absorption |
≤ 1.0 kg/m² |
| Specific heat capacity |
2,100 J/(kg·K) |
Delivery Form
- Thickness: 35 mm
- Diameter: Ø 105 mm
Data sheet PDF
