Adhesives

Adhesives
Tescon Profect 60 mm
Airtight adhesive bonds at corners for vapour control membranes and airtight membranes and for wood-based panels (e.g. OSB).
49,90 EUR
1,66 EUR per
incl. 19% tax excl. Shipping costs
Tescon Invis 60 mm
Exterior use: Creation of windproof seals for breather membranes
Interior use: Airtight taping of vapour control and airtight membranes and of airtight wood-based panels.
22,20 EUR
0,74 EUR per
incl. 19% tax excl. Shipping costs
Tescon Invis 100 mm
Exterior use: Creation of windproof seals for breather membranes
Interior use: Airtight taping of vapour control and airtight membranes and of airtight wood-based panels.
45,90 EUR
1,53 EUR per
incl. 19% tax excl. Shipping costs
Tescon Invis 150 mm
Exterior use: Creation of windproof seals for breather membranes
Interior use: Airtight taping of vapour control and airtight membranes and of airtight wood-based panels.
68,90 EUR
2,30 EUR per
incl. 19% tax excl. Shipping costs
Duplex 2,5 cm
Exterior use: Moisture-resistant sticking of overlaps between underlay and breather (WRB) membranes and of on-roof vapour control and airtight membranes onto hard surfaces.
5,90 EUR
0,30 EUR per
incl. 19% tax excl. Shipping costs
Duplex 2,5 cm Rolle 80 m
Exterior use: Moisture-resistant sticking of overlaps between underlay and breather (WRB) membranes and of on-roof vapour control and airtight membranes onto hard surfaces.
21,95 EUR
0,27 EUR per
incl. 19% tax excl. Shipping costs
Duplex 4 cm
Exterior use: Moisture-resistant sticking of overlaps between underlay and breather (WRB) membranes and of on-roof vapour control and airtight membranes onto hard surfaces.
32,50 EUR
0,41 EUR per
incl. 19% tax excl. Shipping costs
Tescon Vana patch 18 x 18
For simple, quick and permanently sealed adhesion of blown-in insulation holes and for repairs.
0,70 EUR
0,70 EUR per
incl. 19% tax excl. Shipping costs
33 to 40 (from a total of 45)

All products at a glance

Tapes and adhesives for façade and sub-roof – for every application

ProductTypeApplicationKey featurePrice from
Targo ULTRA Adhesive tape Outdoor – overlaps, connections, valley UV-resistant, 12 months exposure, 50–150 mm EUR 0.54/m (50 mm)
Targo BENDIX Flexible tape Indoor & outdoor – penetrations, connections Up to 120°C, 12 months exposure, 50 mm EUR 0.58/m
Targo Fix 1A Cartridge adhesive Outdoor connections, rough substrates No primer needed, bonds on damp substrates EUR 12.70 (310 ml)
Tescon Vana 60 mm ★ All-round tape Indoor & outdoor – overlaps, all detail points Fleece carrier, UV-stable, weatherproof EUR 0.76/m
Tescon No. 1 60 mm Flexible all-round tape Indoor & outdoor – penetrations, connections Maximum flexibility for difficult geometries EUR 0.86/m
Orcon F All-round adhesive Indoor & outdoor – connections, rough surfaces 310 ml or 600 ml tube EUR 8.50 (310 ml)
Tescon Vana patch Adhesive patch Repairs, blow-in openings, detail points 18×18 cm, indoor & outdoor EUR 0.70/pc.

★ Bestseller in this category.

System rule: Targo membranes (VENT WD/WI/WX) should be bonded with Targo adhesive technology (ULTRA, BENDIX, Fix 1A). pro clima membranes (Solitex Fronta, Mento) with pro clima tapes (Tescon Vana, Orcon F). Only system-compatible bonding secures the manufacturer guarantee.

Targo ULTRA – choosing the right width

Targo ULTRA in four widths – which when?

50 mm

Standard width

For overlaps of sub-roof and façade membranes. Standard for most applications. From EUR 0.54/m.

60 mm

More overlap

Slightly more adhesive surface for a more secure bond – recommended under high wind load or where 50 mm is tight. From EUR 0.65/m.

75 mm

Wide connections

For wide overlaps and connections to roof windows, dormers and similar detail points. From EUR 0.83/m.

150 mm

Special tape

For valley connections and particularly wide overlap zones. Covers uneven surfaces over a large area. From EUR 1.74/m.

Outdoor is not the same as indoor

UV protection determines the service life of the bond

A common mistake on building sites: indoor tapes (such as Targo RAPID or basic acrylic tapes) are also used outdoors because they are close to hand. UV radiation degrades the adhesive layer of such tapes within months. The result: loose overlaps, water ingress, structural damage. Always use UV-resistant tapes for outdoor applications – Targo ULTRA or Tescon Vana.

12 monthsweather exposure
Targo& pro clima
UV-stabilised

Frequently asked questions

Frequently asked questions about bonding façade and sub-roof membranes

What is the difference between Targo ULTRA and Targo BENDIX?

Targo ULTRA is specifically developed for outdoor applications – UV-resistant, moisture-resistant, 12 months weather exposure, for overlaps and connections outdoors. Targo BENDIX is more flexible and heat-resistant up to 120°C – suitable for indoor and outdoor use, particularly for penetrations and connections with difficult geometries.

Can I use Targo RAPID outdoors?

No. Targo RAPID is designed exclusively for indoor applications (vapour barriers) and is not UV-resistant. For outdoor applications, Targo ULTRA must be used. An indoor tape used outdoors quickly loses its adhesion under UV radiation and can lead to leaks.

When should I use Targo Fix 1A instead of a tape?

Targo Fix 1A is used for connections on rough, uneven or damp substrates – such as concrete, masonry or rough timber – where a tape would not achieve sufficient adhesion. The advantage: it bonds directly to the substrate without primer.

What is the difference between Tescon Vana and Tescon No.1?

Tescon Vana is the standard all-round tape with fleece carrier – robust, weatherproof, for most indoor and outdoor applications. Tescon No.1 is even more flexible and stretchable – particularly suitable for difficult geometries, curves and critical detail points where Tescon Vana would be too stiff.

What are nail sealing tapes and do I need them?

Nail sealing tapes are laid beneath the batten nail rows and seal the nail penetrations in sub-roof or façade membranes. Without nail sealing tapes, nail holes are potential leak points. We stock matching nail sealing tapes in the nail sealing tapes subcategory.

Does the tape have to match the membrane?

Yes. Targo membranes should be bonded with Targo adhesive technology; pro clima membranes with pro clima tapes. Cross-brand combinations can impair adhesion and void the system guarantee.

Bond permanently airtight

Choose the right tape or outdoor adhesive now.

UV-resistant, 12 months weather exposure – Targo and pro clima for façade and roof.