Targo brand world

Targo brand world
TargoBENDIX UV Facade Tape
Targo Bendix UV 20/40 mm, 25 m roll – black corner adhesive tape for open-jointed timber boarding (gapped cladding).
UV-resistant black high-performance adhesive tape for sealing overlaps, joints, and penetrations—especially suitable for façade membranes used with open-jointed cladding.
Sliding scale prices:
1-9 units per 24,90 EUR (1,00 EUR per)
> 9 units per 24,40 EUR (0,98 EUR per)
24,90 EUR
1,00 EUR per
incl. 19% tax excl. Shipping costs
TargoBENDIX UV 100 mm Facade Tape UV-Resistant
Targo Bendix UV 100 mm, 25 m roll – black high-performance adhesive tape for open-jointed cladding (gapped boarding). Release liner slit in the center.
UV-resistant black high-performance adhesive tape for sealing overlaps, joints, and penetrations—especially suitable for façade membranes used with open-jointed cladding.
Sliding scale prices:
1-7 units per 41,80 EUR (1,67 EUR per)
> 7 units per 40,90 EUR (1,64 EUR per)
41,80 EUR
1,67 EUR per
incl. 19% tax excl. Shipping costs
Targo PRIMER M
Targo PRIMER M High-performance primer for absorbent surfaces
TargoPRIMER M (500 g) is a fast-drying, high-performance primer for rough, porous and absorbent indoor/outdoor substrates, improving adhesion for acrylate and butyl adhesive tapes while stabilizing the surface.
Sliding scale prices:
1-9 units per 18,90 EUR (3,78 EUR per)
> 9 units per 17,90 EUR (3,58 EUR per)
18,90 EUR
3,78 EUR per
incl. 19% tax excl. Shipping costs
TargoND Nail Sealing Tape
TargoND-BAND nail sealing tape Width 55 mm Role 30 m – for underlayment & sheathing membranes
Single-sided nail sealing tape for underlay & sarking membranes—seals nail penetrations, helps prevent rainwater ingress, and supports airtightness/vapour tightness.
Sliding scale prices:
1-8 units per 16,20 EUR (0,81 EUR per)
> 8 units per 15,50 EUR (0,78 EUR per)
16,20 EUR
0,81 EUR per
incl. 19% tax excl. Shipping costs
TargoTAC ND 260 Nail Sealing Pads
TargoTAC ND 260 nail sealing pads 40 × 60 mm – self-adhesive, for roof underlay & sheathing membranes, 500 pieces
Self-adhesive nail sealing pads made from ageing-resistant foam for roofing underlays and sarking membranes. Installed under counter battens, they seal nail penetrations to reduce water ingress and support airtight, vapour-tight roof assemblies.
Sliding scale prices:
1-7 units per 55,40 EUR (0,01 EUR per)
> 7 units per 53,40 EUR (0,01 EUR per)
55,40 EUR
0,01 EUR per
incl. 19% tax excl. Shipping costs
33 to 37 (from a total of 37)

Perfectly coordinated

The Targo system – vapour barriers, tapes and façade membranes from a single source

Targo AG Switzerland develops coordinated airtightness systems for roof, wall and façade. Vapour barrier membranes, adhesive tapes and connection adhesives are designed as a system and tested together. This secures the system guarantee – and saves time during planning.

Adhesive technology

Targo tapes & adhesives

RAPID (indoors), ULTRA (outdoors, UV-resistant), FLEX (penetrations) and Fix SK (connection adhesive) – the complete Targo adhesive technology range.

To adhesive technology → Vapour barriers

Targo vapour barrier membranes

VariVap N and VariVap S – moisture-variable high-performance vapour barriers with sd value 0.2–20 m for roof and wall; VariVap S specifically for blow-in insulation materials.

To vapour barriers → Façade & sub-roof

Targo façade membranes

VENT WD (closed façade) and VENT WI (open-joint cladding, black) – vapour-open, tear-resistant wind barriers for façade and sub-roof.

To façade membranes →

Product lines at a glance

Targo tapes – RAPID, ULTRA and FLEX: which tape for which application?

The three Targo tape lines are clearly designed for different areas of use.

ProductApplicationKey featurePrice from
Targo RAPID Indoors – vapour barriers Tear-able by hand, high-performance acrylic adhesive EUR 0.44/m (50 mm)
Targo ULTRA Outdoors – UV-resistant Weatherproof, UV-stabilised, for sub-roof and façade membranes EUR 0.54/m (50 mm)
Targo FLEX Penetrations & curves Highly flexible, for pipes, cables, edges and rough substrates EUR 0.50/m (50 mm)
Targo Fix SK Wall connections – indoors Solvent-free, formaldehyde- and isocyanate-free, broad adhesion spectrum EUR 8.40 (310 ml)
System rule: Targo vapour barrier membranes (VariVap N/S) should be bonded using Targo adhesive technology (RAPID, FLEX, Fix SK). Only then does the Targo AG Switzerland system guarantee apply.

Top products

The most popular Targo products

Targo RAPID

Airtight tape for vapour barriers indoors – tear-able by hand, extremely age-resistant. Available in 50 mm and 60 mm widths.

RAPID 50 mm → RAPID 60 mm →

Targo ULTRA

Tape for outdoor use – UV-resistant, weatherproof, for sub-roof and façade membranes. Available in 50 mm and 60 mm widths.

ULTRA 50 mm → ULTRA 60 mm →

Targo VariVap S

Reinforced moisture-variable vapour barrier (sd 0.2–20 m) – specifically approved for use with blow-in insulation materials. As cut piece and roll 75 m².

VariVap S cut piece → VariVap S 75 m² →

Targo from practice

Targo systems – proven in blow-in insulation

Targo AG Switzerland has been supplying reliable system solutions for the building envelope for years. As a specialist contractor for blow-in insulation, we use Targo VariVap S every day – the reinforced membrane is specifically approved for use with blow-in insulation materials and has proven itself in practice many times. Paired with Targo RAPID for overlaps and Targo FLEX for all penetrations.

37+Targo products
CHSwiss quality
Systemguarantee
Alternative: pro clima brand world →

Frequently asked questions

Frequently asked questions about Targo products

What is the difference between Targo RAPID and Targo ULTRA?

Targo RAPID is designed for indoor use – it bonds vapour barriers and airtightness membranes indoors. Targo ULTRA is UV-resistant and weatherproof – suitable for outdoor applications such as sub-roof and façade membranes.

What is Targo FLEX used for?

Targo FLEX is highly flexible and suited to difficult detail points: pipe penetrations, cable routes, rafters and slightly rough substrates. It can be wrapped around curves without tearing.

What is the difference between Targo VariVap N and VariVap S?

VariVap N is the standard version for roof and wall. VariVap S is reinforced and specifically approved for use with blow-in insulation materials – important for blow-in insulation in existing constructions.

Which façade calls for Targo VENT WD, and which for VENT WI?

VENT WD is for closed façades without visible joints. VENT WI is black and UV-stabilised for open façades with shadow joints or open-joint cladding – up to 30 mm joint width, up to 35 mm for trapezoidal cladding.

Do Targo tapes have to be combined with Targo vapour barriers?

For the system guarantee, yes. Targo AG Switzerland tests membranes and adhesive technology together – with cross-brand combinations, the system guarantee is void. We recommend staying consistently within the system.

Where is Targo Fix SK used?

Targo Fix SK is a permanently elastic wall connection adhesive for indoor use – solvent-free, formaldehyde- and isocyanate-free. It is suitable for airtight connections of vapour barriers to concrete, wood, masonry and other substrates.

Complete Targo system

Choose the right Targo product now.

Vapour barriers, tapes and façade membranes – perfectly coordinated from Switzerland.

To adhesive technology → To vapour barriers →